
Town 'n' Country Cabinet Refacing
Cabinet Refacing in Town 'n' Country, FL
Kitchen and bathroom cabinet refacing in Town 'n' Country, FL. New doors, veneer, and hardware over your existing boxes. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Town 'n' Country and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Kitchen cabinet refacing cost and scope for Town 'n' Country homes
Cabinet refacing updates the look of your kitchen or bathroom without tearing out the boxes that are already bolted to your walls. New doors, drawer fronts, and veneer go over what's there. The hardware gets swapped too. It costs a fraction of a full replacement because the carpentry that's already working stays in place.
Town 'n' Country Cabinet Refacing handles this work on homes built across the decades, including the plywood and particleboard boxes common in houses from the 1960s through the 1980s. Most of those boxes are still structurally solid. They just need new faces. Contact us or keep reading for the cost breakdown below, or jump straight to About us.

What we do
Cabinet Refacing services
Cabinet Refacing across Town 'n' Country and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet refacing in Town 'n' Country: new doors, veneer, and hardware over your existing boxes. Free estimates, honest pricing.
Learn more →
Kitchen Cabinet Refacing
Kitchen cabinet refacing in Town 'n' Country: new doors, veneer boxes, soft-close upgrades. Free estimates, straight pricing.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Town 'n' Country: moisture-resistant doors, veneer, and sealant. Free estimates for one vanity or several.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Town 'n' Country matches new doors to existing boxes for a fast, affordable kitchen refresh. Free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Town 'n' Country refreshes solid wood cabinets with sprayed finishes built for humid kitchens. Free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Town 'n' Country are built to match odd box sizes and discontinued profiles. Free estimates on fabrication.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Town 'n' Country matches panels and doors to your perimeter cabinets with durable, humidity-resistant finishes.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Town 'n' Country: strip, repair, and reseal before refacing. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Town 'n' Country Cabinet Refacing
Box assessment before any quote
We check the condition of your existing cabinet boxes first, so the estimate reflects what your kitchen actually needs, not a generic package.
Materials picked for this climate
Humidity in the Tampa Bay area wears down cheap thermofoil fast. We steer homeowners toward veneer and laminate options that hold up here.
Written estimates, no discount gimmicks
You get a clear number before work starts. No seasonal percentage-off banners, no bait pricing that changes once the crew shows up.
Independent, not a franchise script
Town 'n' Country Cabinet Refacing answers questions directly instead of routing you through a corporate call center.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist visits to assess existing cabinetry and discuss style goals.
Step 2Measurement & Design
Precise measurements are taken to plan door sizes, finishes, and layout adjustments.
Step 3Material Selection
Homeowners choose from veneers, finishes, and hardware samples for their project.
Step 4Surface Preparation
Existing boxes are cleaned, sanded, and repaired to ensure a smooth refacing surface.
Step 5Refacing Installation
New veneers, doors, and panels are applied and fitted to the existing cabinet frames.
Step 6Final Walkthrough
A final inspection confirms alignment, finish quality, and functioning hardware before project closeout.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing Town 'n' Country FL cost
Pricing depends on linear footage, door material, and how much prep your existing boxes need. These are honest ranges, not a locked quote. A free estimate gets you an exact number. Request a Get a Free Estimate to get a real number for your kitchen.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only replacement | $2,500–$5,500 | new doors and drawer fronts, existing boxes stay untouched. |
| Standard kitchen refacing | $5,500–$9,500 | veneer over box surfaces plus new doors, drawer fronts, and hardware. |
| Premium refacing package | $9,500–$14,000 | upgraded door material, soft-close hinges, and crown molding added. |
| Bathroom vanity refacing | $1,200–$3,000 | smaller footprint, moisture-resistant materials. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods that hold up in Florida humidity
Thermofoil and laminate peel faster here than they do in drier climates. The materials below are what we actually install, picked for durability in a humid subtropical environment.

Wood Veneer Sheets
Thin wood veneers go over existing boxes for a refreshed natural look. Properly sealed, they resist the swelling that plagues cheaper laminate in Tampa Bay humidity.

Laminate Finishes
Durable laminate gives a cost-effective, easy-to-clean surface. We select grades built to resist the edge-peeling that shows up on older thermofoil within a few humid summers.

Solid Wood Doors
New solid wood doors replace old fronts for better durability and a heavier, more finished feel than foil-wrapped MDF.

Cabinet Hardware
Knobs, pulls, and hinges are matched to the new door style, with corrosion-resistant finishes that handle kitchen and bathroom moisture.

Soft-Close Hinges
Upgraded hinges close quietly and reduce the wear that causes box screws to loosen over time.

Protective Topcoat
A clear sealant layer protects finished surfaces from moisture and daily wear, which matters most on boxes near sinks and stovetops.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
Most projects move faster than homeowners expect once fabrication is done. Here's how a typical kitchen breaks down.
- 01
Consult and measure
same day - 02
Door and veneer fabrication
1–2 weeks - 03
Install
2–4 days - 04
Final walkthrough
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance for Cabinet Refacing
Refacing itself, meaning new doors, veneer, and hardware, rarely triggers a permit. Town 'n' Country is unincorporated, so anything that does require sign-off routes through Hillsborough County building offices, not a city hall. Always verify specifics with the county before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Relocating or adding electrical outlets behind cabinets | Door and drawer front replacement |
| Structural removal or replacement of cabinet boxes | Veneer application over existing boxes |
| Plumbing changes tied to a vanity or sink cabinet | Hardware upgrades |
| — | including soft-close hinges |
| — | Crown molding addition |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
Some of this work is reasonable to tackle yourself. Some of it isn't.
| DIY | Hire a pro |
|---|---|
| Swapping knobs, pulls, and basic hinges | Box assessment to confirm structural soundness |
| Cleaning and light touch-up on existing finishes | Veneer adhesion, which fails fast in humidity if done wrong |
| Installing stock shelf liners or organizers | Hinge boring and alignment for a clean, even fit |
| — | Custom door sizing to match older, non-standard boxes |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing
Give us a call at (727) 349-3376 and we'll walk through what your kitchen actually needs. <!-- rover-autofix-links -->
- Thermofoil is bubbling or peeling at the edges
- Laminate corners are curling or lifting
- Doors look dated but the boxes feel solid when you knock on them
- You're prepping a rental or investment property to list
- Hinges are loose, sagging, or slamming instead of closing smoothly
- [Cabinet Refacing](/services/cabinet-refacing)
- [Kitchen Cabinet Refacing](/services/kitchen-cabinet-refacing)
- [Bathroom Vanity Refacing](/services/bathroom-vanity-refacing)
- [Cabinet Door Replacement](/services/cabinet-door-replacement)
- [Town N Country](/locations/town-n-country)
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Town 'n' Country and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Westchase · Egypt Lake-Leto · Citrus Park · Oldsmar · Carrollwood · Safety Harbor · Northdale · Keystone · Lake Magdalene · East Lake · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say

Margaret S.
4 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the budget door replacement turned out better than I pictured.
Town 'n' Country, FL

David C.
1 week ago
5 out of 5 starsCalled Town 'n' Country Cabinet Refacing after a neighbor tip in Town 'n' Country. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet refinishing.
Town and Country Park, FL
Eric D.
3 days ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for cabinet refacing. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Westchase border, FL
Common questions
Cabinet Refacing FAQs
How much does cabinet refacing cost in Town 'n' Country?
Most jobs run somewhere between $2,500 for a small door-only swap and $12,000+ for a full kitchen with premium doors and molding. The exact number depends on linear footage, door material, and how much box prep your cabinets need.
How long does cabinet refacing take?
A single kitchen typically runs one to two weeks start to finish, including fabrication lead time. Install day itself is usually two to four days, not weeks.
Do I need a permit for cabinet refacing?
Refacing alone, meaning new doors, veneer, and hardware, usually doesn't require a permit. If the job touches electrical outlets or structural changes, that routes through Hillsborough County since Town 'n' Country isn't its own city.
Is DIY cabinet refacing a good idea?
Swapping a few knobs or pulls is a fine weekend project. Full box veneer work and matching custom doors is where DIY attempts usually go sideways, especially in humid conditions.
When should I call a cabinet refacing pro?
Call when thermofoil is bubbling, laminate edges are curling, doors look dated, or you're prepping a rental to sell. Those are the jobs where a rushed DIY fix tends to fail within a year.
What affects cabinet refacing pricing the most?
Linear footage of cabinets, door material grade, and the condition of your existing boxes drive most of the cost swing. Add-ons like soft-close hinges or crown molding move the number too.
What is typically included in a cabinet refacing project?
New doors and drawer fronts, veneer over visible box surfaces, and matching hardware. Interior shelving and layout usually stay as-is unless you ask otherwise.
How do I prepare my home before cabinet refacing starts?
Clear out cabinet contents and countertop items near the work zone. Crews handle the rest, including old door removal and surface prep.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Town 'n' Country.
